If the Term and YTD values are not being generated, this may be because you do not have a grade plan for the single term courses selected in the grade average calculation. Once a grade plan is added to the calculation and you re-run the calculation,  the Term and YTD values will be generated. If you can add this in through:
  1. onRecord > Settings > grading
  2. Edit the Percentage Calculation
  3. Click on Grade Plans
  4. Expand the 2017-2018 1st and 2nd Semester
  5. Select the Grade plans for the single term classes
  6. Save
These should now show up in your calculations.